The Path To Finding Better Tips

A Guide to Wood Science

The Biological research of wood and it’s renewable material is what is referred to as wood science. In other words, the term wood science can also be known as wood technology. To be able to study wood it has to be compared to other products. The comparison made against other products will include the features of the material against those of wood, the value and the ease it can be worked on. Wood has many advantages and this technology takes the advantages and utilizes them. Wood can be applied in very many applications, and this gives it an upper hand over other materials. Wood is renewable, and this makes it more precious. The other merit is that a part of the harvested material is at the same time used as energy to produce the product.

The good appearance of your timber made structure cannot be guaranteed if protection of the timber is not done. The biggest threat to wood being moisture and insects has to be kept away from the wood. The rotting and decay of the timber products are caused by the moisture and the insects. Many methods are available in the treatment of wood one of the most common being the ACQ – alkaline copper Quaternary. As the name implies the preservative is made of copper products. Although being a good method to use for wood protection it has presents some few challenges. It is a highly corrosive chemical that affects most metals that are used together with the wooden products. The species of the wood and the application of the wood will determine how many chemicals will be used on the wood. The concentration level of the chemical will be different for two pieces of wood where one is used above ground and the other close to a water body.

Another wood treating method that is fast being accepted is the use of copper metal. The use of this method is fast being accepted because it is not corroding the metal fasteners. This process is what in other words called the micronized copper wood preservative. The copper metal is applied to the wood as small microscopic particles injected into the wood at high pressure. The process eliminates the need to dissolve the copper as is done in earlier copper-based preservatives. This process is highly effective and the wood properties and heightened. The timber treated in this way is used in both outdoor and indoor frames that last very long.

Termites cannot eat through timber treated through this method. Unlike other methods of treatment this method is not corrosive. When you use this method to treat wood, then you will not need to worry for at least ten years.